PRODUCT LINE

To review additional technical data, click on any of the following product names.

Product Name	Product Number	Application
ACRYLBOND	725	Eliminates cracking/shrinking in precast products. Bonds new concrete to old concrete.
BEAD PLUS IXX	684	Reduces water absorption in paver manufacturing. This product is especially effective in reducing secondary efflorescence and increasing strength.
BOND FORCE ITA	682	Eliminates cracking (crazing), shrinking and bug holes in architectural, ornamental and other precast products. Provides 18% greater strength than competing products. Also increases tensile strength and lowers water absorption when using light weight aggregates. Excellent for making GFRC.
CRETE CLEAN 5.0 Commercial Only	689	A water-based surface cleaner for the removal of efflorescence stains from pavers, blocks, and other concrete. It is also effective in removing concrete/pigment build up on rubber molds.
EVERBEAD I	723	Invisible, breathable, water-based sealer for use on vertical surfaces that will last for more than 5 years. Sealer is not sensitive to ultraviolet or weather degradation. For horizontal surfaces, we recommend the use of Everbead II.
EVERBEAD II	734	Sets up a barrier at or slightly below the surface of concrete allowing the material to breathe, yet preventing moisture from penetrating. Has qualities similar to Everbead I but can be used on both vertical and horizontal surfaces.
EXCEL	640	Highly concentrated accelerator that reduces precast stripping time by 50%.
HI-PSI DRY	629	Fully biodegradable plasticizer for dry cast products that will increase strength by 30%, or more, and also provide a smoother (no swipe) finish.
HI-PSI WET	657	High range plasticizer for wet cast products that will increase strength by 20%, or more, and also provide a very high quality finish.
LPC	600	Concentrated plasticizer that improves the lubricity and workability of no-slump concrete mixes.
MIXER MAGIC 2.0	610	Fully biodegradable nonhazardous solution that provides a durable, protective coating and eliminates buildup on block and precast mixers and other equipment.
NATURAL RELEASER	729	Mixture of vegetable oils which has been specifically formulated for use as a release agent on metal molds. This is our strongest release agent and the VOC is only 8 gm/L.
NO CHLOR	674	Low cost, highly powerful accelerator that will allow dry cast producers (blocks, bricks, pavers, roof tiles, etc.) to reduce cure time. No Chlor does not contain calcium chloride.
PACKERHEAD	705	Water-based pipe pallet release agent for concrete pipe producers using Packerhead or similar machines.
RATIO MASTER 1.0	662	Provides higher strength and a smoother finish (no swipe) to no-slump concrete products such as blocks, pavers, pipe, roof tiles and bricks.
RATIO MASTER 5.0	661	Very efficient plasticizer for wet cast products that has been formulated to provide higher strength at 24-hour and 28-day time periods and has the ability to obtain water ratios below 30%.
RATIO MASTER HVW	673	High range plasticizer for wet cast products. Reduces bug holes. Gives the highest 16-hour strength of all our plasticizers. Highly recommended for self consolidating concrete (SCC), especially for products containing light weight aggregates.
RELEASER 2.0	605	Nontoxic, nonflammable, fully biodegradable solvent release agent designed for difficult mixes with a high slump and/or high concentrations of cement, superplasticizer or pigment.
RELEASER 4.7	622	Fully biodegradable, non-hazardous solvent-based release agent which has been specifically formulated for use on very difficult mixes and/or products where concrete buildup or sticking is a serious problem.
SEAL WET Commercial Only	636	Sealwet can be applied to both dry and damp concrete surfaces. It will result in either a satin or glossy finish depending on the amount of dilution by water. It is not sensitive to ultraviolet light. This product will not alter the color of the concrete surface and will maintain a cleaner appearance by inhibiting mold and fungus formation.
STRIP 3.3	715	Water-based release agent for higher pressured spray systems. This is a very durable release agent that works effectively under a wide range of climatic conditions.
STRIP 4.4	719	Water-based release agent for lower pressured spray systems. This is our most popular release agent and is particularly effective in reducing bug holes.
STRIP 4.6	713	Water-based release agent for difficult mixes and/or products where concrete buildup/ sticking is a problem, particularly successful for use in prestress operations.
STRIP IPS	707	Water-based release agent for polyurethane and natural latex rubber molds. This product has a VOC of only 1gm/L.
SURE AIR	663	Liquid resin air-entraining admixture designed to produce microscopic air bubbles in concrete mixes.
WET-N-DRY	642	Concentrated accelerator and plasticizer for dry cast producers that will reduce the cure time in the kiln and reduce steam usage.

TO REVIEW ADDITIONAL TECHNICAL DATA, CLICK ON ANY OF THE ABOVE PRODUCT NAMES. TO RECEIVE COPIES OF TECHNICAL DATA SHEETS, MATERIAL SAFETY DATA SHEETS AND PRICING LISTS, OR TO ADD YOUR NAME TO OUR MAILING LIST, PLEASE FILL OUT THE INFORMATION SAMPLE REQUEST FORM BELOW.

* Required Fields

Concrete Producers Solutions Inc.
Telephone: (800) 231-6403 or (281) 398-6244
Fax: (281) 398-6242
16720 Park Row
Houston, Texas 77084-5021
email: concrete@concrete-solutions.com

"Serving your industry since 1979"

Product Line | Home