LPC

PURPOSE

LPC is a fully biodegradable highly concentrated plasticizer which has been specifically formulated to improve the lubricity and workability of no-slump concrete mixes.

OTHER BENEFITS

Not only will LPC substantially reduce the cycle time for the manufacture of no-slump products, such as concrete blocks, bricks and pipe, LPC is an efficient water reducer and will produce a stronger and less porous finished product with a much better surface appearance. Concrete pipe producers will particularly appreciate the denser, more consolidated product resulting from the use of LPC. LPC will also reduce mold wear and reduce/eliminate any need to use an air entraining admixture.

APPLICATION

In most applications, LPC should be added at a rate of 0.5 - 1.5 ounces per 100 lbs. (32.5 to 97.5 ml per 100 kg) of cementitious material. If the aggregate is porous or the cement ratio is low, then more LPC will be required, however, extreme overdosing will cause some strength loss. For maximum effectiveness, dilute with water at a ratio of 10:1 and add the diluted product during the final water phase of the mixing cycle. Do not add this product at an earlier stage as this will lower its effectiveness. Normal additions of water to the mix should be reduced by at least 2 to 3 percent to improve machine efficiency because the lubricity of LPC increases with decreasing water levels. In the event an air entraining admixture is to be used, the amount should be reduced by at least 90% because LPC will activate and cause additional air entraining. LPC is compatible with most other additives, however, if you intend to use other admixtures, please contact us at the number listed below for consultation.

STORAGE AND AGITATION

Store this product in areas where the temperature exceeds 45o F and protect from freezing. Shelf life normally is 12 months when stored in a reasonable environment and not contaminated by foreign materials. Occasional agitation is required when stored for a period exceeding 30 days.


For Additional Information Contact:

Concrete Producers Solutions Inc.
Telephone: (800) 231-6403 or (281) 398-6244
Fax: (281) 398-6242
16720 Park Row
Houston, Texas 77084-5021
email: concrete@concrete-solutions.com


Product Line | Home